Application dedicated to HAM amateur radios allowing for frames collection and upload to webapp.

Binaries for supported platforms are available to download on http://radio.pw-sat.pl/communication/desktopsoftware. Binaries contain also freezed GNURadio Companion (GRC) flow graphs. It's strongly recommended to use these binaries.

More help on the operation of application can be found in Wiki: https://github.com/PW-Sat2/HAMRadio/wiki

In fact, the software comprises two parts:

• main application - functions like: showing main window, frames list, receiving frames via ZMQ, having buttons to run external binaries with GRC part: signal sources/SDR, demodulator etc.
• GnuRadio Companion part - signal source: SDRs, IQ files, demodulator/decoder - always freezed as binary

This repo itself does not contain GRC part - running main.py file one can use all functionalities but Signal source and Demodulator.

Just run main.py file via Python 2.6 interpreter.

Run selected flow charts from https://github.com/PW-Sat2/GSControl/tree/master/gnuradio/downlink repository in GnuRadio Companion:

• downlink.grc is "Run demodulator" option from main application
• a directory sources contains

Out-of-tree GRC block you can find in a repository https://github.com/PW-Sat2/gr-kiss and https://github.com/PW-Sat2/gr-gpredict-doppler

1. Install GRC so you can run everything in https://github.com/PW-Sat2/GSControl/tree/master/gnuradio/downlink repository
2. Install all python dependencies so you can run Main application from this repository (try main.py file)
3. Clone https://github.com/PW-Sat2/GSControl repository
4. Clone https://github.com/PW-Sat2/HAM-desktop-application repository
5. Adjust non-relative paths in these two files: https://github.com/PW-Sat2/HAM-desktop-application/blob/main-app/main_linux.spec and https://github.com/PW-Sat2/HAM-desktop-application/blob/main-app/grc_part/grc_part_linux.spec
6. Correct paths to GSControl repository and HAM-desktop-application repositories in file https://github.com/PW-Sat2/HAM-desktop-application/blob/main-app/config.sh
7. Run build_linux.sh file from this repository. At the end of building process the application should be ready (in zip also).